Boston Aquarium Society Message Board

I bought a used 125 and it was re-sealed. I'm not sure how long, if at all, it held water. I filled it up outside last Saturday and was wondering if anyone knows how long I should test it for. The last thing I want is 125 gallons of water on my floor! Anyone with experience would be great! Thanks.

I bought a 125 leaker last summer. After I resealed it I first let it cure for at least a week before I put ANY water in it. Then when I filled it for a test I left it for a couple of days while checking for possible leaks. Watch for slow seeps - may not show up for a day or two. Mine had a pinhole near the bottom of one corner that didn't show up until the tank was almost completely full. The leak was going in at the bottom but was wicking along the inner seam and not leaking out until it got almost to the top. The whole corner was weak and probably would have failed on me. Patience. Patience. Patience.

Good luck!

-- Dave

_________________
There are 10 kinds of people - Those who understand binary
And those who don't

Thanks front-fan! I will look for any slow leaks.